Campbell Scientific LNDB LoggerNet Database Software - Manual (Page 21)

LNDB
6. Checking Status and Reviewing Data
The function of the Setup Tab of LNDB’s main screen is described in Section
3. The other tabs on the main screen can be used to check the status of LNDB
and to review LNDB’s data. The Status Bar at the bottom of the LNDB main
screen can also be used to quickly check the status of the LNDB engine,
database, and LoggerNet server. All of these functions are described below.
6.1 Status Tab
The Status tab shows the storage status for each datalogger table. The
following columns are shown:
Database Table - The database table name for each station’s table.
They are grouped by station.
Last Write Time - The last time that data was written to the database
table.
Last Record Timestamp - The timestamp of the last record in the
database table.
Status - There are 3 valid values:
Storing Data - Data for the table is being stored.
15