AEG BP8314001 - Manual (Page 23)

• If you do not unplug the core temperature sensor.
When the pyrolytic cleaning starts, the appliance door is locked. After the function finishes,
the door is locked for a cool down phase. Some of the appliance functions are not available
during the cool down phase.
WARNING!
When the pyrolytic cleaning finishes, the appliance is very hot. Let it cool down. The is a risk
of burns.
Pyrolytic cleaning:
1.
Remove the worst of the residual dirt manually.
2. Activate the appliance and choose the Pyrolysis function in main menu. Press OK to
confirm.
3. Set the length for the procedure:
– Light - 1h for a low degree of dirt,
– Normal - 1h 30min for a usual degree of dirt,
– Intense - 2h 30min for a high degree of dirt.
4. Press OK to confirm.
Shelf support
You can remove the shelf support to clean the side walls.
Removing the shelf support
1.
Pull the front of the shelf support away
from the side wall.
2. Pull the shelf support from the back of
the side wall to remove it.
To install the shelf support follow the proce-
dure in reverse.
Valid with telescopic runners:
The retaining pins on the telescopic shelf
runners must point to the front!
1
2
Care and cleaning 23