AEG BP8314001 - Manual (Page 26)

Problem Possible cause Remedy
The appliance does not
heat up.
The clock is not set. Set the clock.
The appliance does not
heat up.
The necessary settings are not set. Check the settings.
The appliance does not
heat up.
The Child Lock is activated. Refer to "Deactivating the Child
Lock".
The appliance does not
heat up.
The fuse is released. Make sure that the fuse is the
cause for the malfunction. If the
fuse releases again and again, re-
fer to an authorized electrician.
The display shows F111. The CT Sensor plug is not correctly
installed into the socket.
Put the plug of core temperature
sensor as far as possible into the
socket.
The oven lamp does not
operate.
The oven lamp is defective. Refer to "Replacing the oven
lamp".
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
min.
3 mm
26 Installation