AT&T Voice Terminal 8510T - Manual (Page 19)

To retrieve parked call 1
from any extension
2
Dial Answer Back code
[dial tone]
Dial extension where call is parked
[confirmation tone]
Note: If you receive intercept tone, parked call has
been disconnected or retrieved by someone else.
Call Pickup
To answer a call to a 1 Press [ Call Pickup ]
member of your pickup or Dial Call Pickup code
group when your voice
●
You are connected to ringing call
terminal is idle
To pick up a call while 1
you are active on another
call
2
Press [ Hold ]
●
Present call is put on hold
●
Green light flutters
Press [ Call Pickup ]
●
You are connected to incoming call
Note: To return to held call after completing pickup
call, press [
xxxxx ] button next to fluttering green
light.
16