Samsung SGH-T879ZBBTMB - Manual (Page 149)

Messages 144
• If your network requires that you accept SSL certificates, tap
the Accept all SSL certificates field to place a check mark in
the box and activate this additional level. Most often, this option
is not required. Confirm this information with your IT
Administrator.
Important! If your Exchange server requires this feature,
leaving this field unchecked can prevent
connection.
8. Consult your IT Administrator if it is necessary to
enable the Use client certification option.
9. With the new server information entered, tap Next.
10. Read the on-screen Activation disclaimer and, when
prompted, tap OK. The device then verifies your
incoming server settings.
11. If prompted, read the Remote security administration
information and tap OK to accept the service and
continue.
12. Adjust the various on-screen configuration fields and
tap Next. It may take a few seconds for the next screen
to load.
13. If prompted, read the Activate device administrator?
screen and tap Activate to complete the email setup
process.
Note: This process can take a few minutes. If the previous
setup screen re-appears, ignore it and do not alter any
fields during this process.
14. Identify your new work email account with a unique
name (Ex: Work), then tap Done.
Opening an Exchange Email
1. From the Home screen, tap ➔ (Email).
2. Tap the account name field (upper-left) to open the
complete email account list page.
3. Select an exchange email account and tap an email
message.