Samsung SGH-T879ZBBTMB User Manual

Page 261

Advertising
background image

Changing Your Settings 256

Android Beam

This feature (when activated via NFC) allows you to directly
beam application content to another NFC-capable device
when they are in direct contact. These files are typically
small such as Calendar and Contact entries.

1. Press

➔

and then tap Settings ➔ More...

2. Verify the NFC feature is active.

3. Tap Android Beam and make sure the feature is turned

on.

4. If not already active, in a single motion touch and slide

the Android Beam slider to the right to turn it on

.

5. Complete the transfer process between the two

NFC-enabled devices by placing them back to back.

Wi-Fi Direct Setup and Settings

You can configure your device to connect directly with other
Wi-Fi capable devices. This is an easy way to transfer data
between devices. These devices must be enabled for Wi-Fi
direct communication. This connection is direct and not via a
HotSpot or WAP.

Note: Activating this feature will disconnect your current Wi-Fi

network connection.

To give your Wi-Fi Direct connection a unique name:

It can be difficult to pair to external devices if all you have is
a generic name (ex: Android 12345). It is recommended you
provide your connection with a unique name.

1. Press

➔

and then tap Settings ➔ More... ➔

Wi-Fi Direct.

2. Press

and then tap Device name.

3. Edit the current name and tap OK to save the new

identification.

ON

Advertising