Samsung EC-S850ZSBG-E1 - Manual (Page 66)

《65》
Setup menu
[ Connecting an External Device (USB) ]
■ You can select an external device to which you want to connect the camera
using the USB cable.
● Sub menus
- [Computer] : Select this if you want to connect the
camera to your PC. Refer to page 77
for instructions on how to connect the
camera to your PC.
- [Printer] : Select this if you want to connect the
camera to your printer.
Refer to page 57 for instructions on
how to connect the camera to your
printer.
[ LCD brightness ]
■ You can adjust the LCD brightness.
● [LCD] sub menu : Dark, Normal, Bright
SETUP
AF Lamp
Sound
USB
LCD
Video Out
Back: Set:OK
Computer
Printer
SETUP
Sound
USB
LCD
Video Out
Quick View
Back: Set:OK
Dark
Normal
Bright
[ Selecting Video out type ]
■ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
■ Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the
stored still images or movie clips by connecting the
camera to an external monitor via the AV cable.
When the camera is connected to an external
monitor, the LCD monitor will be turned off
automatically.
SETUP
USB
LCD
Video Out
Quick View
Reset
Back: Set:OK
NTSC
PAL
Yellow - Video
White - sound