Samsung RSG257AAWP-XAA - Manual (Page 11)

setting up _11
Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
1 using a screwdriver, and then
disconnect the wires by gently pulling them apart 2 .
2. Remove hinge screws 4 and the ground screw 5 by turning counter-clockwise, and take off
the upper hinge 6 . Be careful that the door does not fall on you as you are removing it
3. Next, remove the door from the lower hinge 7 by carefully lifting the door straight up 8 .
4. Remove the lower hinge 9 from the bracket 10 by gently
lifting the lower hinge upwards.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order
01
SETTING UP
7
2
1
Be careful not to pinch
the water tubing and
wire harness on the
door.
4
5
6
Be sure to keep track of all
parts you are removing.
8
10
9
DA99-01746A (EN)-19.indd 11 14. 1. 18. �� 11:42