Samsung DVD-VR345-XAA - Manual (Page 46)

46 - English
S
ystem Setup
Quick Recording
It takes about 10 seconds for a disc to load (initialize)
every time you turn on the unit. To bypass this initializa-
tion process, you can set the Quick Recording feature
to On. This enables you to record immediately without
having to wait for the disc to load.
1 With the unit in Stop mode/No Disc mode, press the
MENU button.
2 Press the …† buttons to select Setup , then press the
ENTER or √ button.
3 Press the …† buttons to select System , then press
the ENTER or √ button.
4 Press the …† buttons to select Quick Recording ,
then press the ENTER or √ button.
5 Press the …† buttons to select On , then press the
ENTER or √ button.
System DVD-Recorder
No Disc
Timer Rec.
Setup
VCR √ √
Video Input : AV 1 √ √
DVD EP Mode Time : 6 Hours √ √
Chapter Creator : Off √ √
Quick Recording : Off √ √ Off
On
Setup DVD-Recorder
No Disc
Timer Rec.
Setup
System √ √
Clock Set √ √
Channel Set √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
RETURN ENTER MOVE EXIT
RETURN ENTER MOVE EXIT
The Quick Recording is set to Off as default.
If this function is set to on, power consumption
will be increased when the unit is powered off.
Note
System DVD-Recorder
No Disc
Timer Rec.
Setup
VCR √ √
Video Input : AV 1 √ √
DVD EP Mode Time : 6 Hours √ √
Chapter Creator : Off √ √
Quick Recording : Off √ √
RETURN ENTER MOVE EXIT
00995G-VR345-XAA-Eng31-46 2006.4.10 2:51 PM Page 46