Samsung DVD-VR345-XAA - Manual (Page 68)

68 - English
R
ecording
Making a One Touch
Recording (OTR)
One-Touch Recording (OTR) allows you to add
recording time in preset increments up to 4 hours by
pressing the
REC button repeatedly.
1 Press the CH/TRK ( / ) buttons or number but-
tons to select the channel to record.
If you want to record through a connected external
component, press the
INPUT SEL. button to
select an appropriate external input(AV1, AV2 or
DV).
• CATV channel: 1 to 125
• TV channel: 2 to 69
2 Press the DVD or VCR button on the remote, or
DVD/VCR on the front panel to select the DVD or
VCR mode.
3 Press the REC button to start recording.
4 While in Record mode, press the REC button
again to activate the One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
Display and the DVD Recorder & VCR will record
for exactly 30 minutes.
5 Continue pressing REC button to add recording
time in preset increments up to 4hours.
➝ 0:30 ➝ 1:00 ➝ 1:30 ➝ 2:00 ➝ 3:00 ➝ 4:00 ➝ Off
• The DVD Recorder & VCR stops recording
automatically when the time has elapsed.
To stop recording
Press the STOP ( ) button.
The message “Press STOP button once more to
cancel Timer Record.” is displayed.
Press the
STOP ( ) button again.
The message “Updating the Information of disc.
Please wait for a moment.” is displayed.
The timer counter decreases by the minute
from 4:00 to 0:00, then the DVD Recorder
& VCR stops recording.
Note
Recording through the
DV Input jack
You may control your Camcorder using the IEEE1394
(DV) interface.
Follow these directions to record onto a disc or tape
from a camcorder that has a DV output jack.
1 Connect the DV output jack of your camcorder to
the DV input jack on the front of your DVD
Recorder & VCR using a DV cable.
2 Power on your DVD Recorder & VCR and switch
to DV mode by pressing the
INPUT SEL. on the
remote control.
3 Press the DVD or VCR button on the remote, or
DVD/VCR on the front panel to select the DVD or
VCR mode.
4 Press the REC SPEED button repeatedly to select
the recording speed(quality).
DVD: ➝ SP ➝ LP ➝ EP ➝ XP
VCR: ➝ SP ➝ SLP
5 If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
6 Select the Play icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
7 To start recording, Press the œ √ button to select
rec ( ●) icon in the top side of the screen, then
press the ENTER button.
You can press the REC button on the remote con-
trol to start recording. To display playback related
icons on the screen, press either direction button
on the remote control.
8 Press the STOP button on your DVD Recorder &
VCR when the recording is finished.
Some camcorders may not work with your
DVD Recorder & VCR even if they have a DV
output jack.
Also refer to the user manual for your cam-
corder when recording through the DV jack.
Note
DV
RETURN SELECT MOVE
The DV device is connected.
00995G-VR345-XAA-Eng47-75 2006.4.10 2:53 PM Page 68