Samsung SPN4235X-XAA - Manual (Page 21)

Customizing the Picture
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,
and Tint settings of your PDP.
41
1 Press the MENU button, then press the ENTER
button.
2 Press the LEFT or RIGHT button to select “Custom”,
“Dynamic”, “Standard” or “Movie” picture setting.
• You can select “High”, “Middle”, “Low” or
“Custom” in PC/DVI mode.
3 Press the MENU button to exit.
Using Automatic Picture Settings
Your PDP has automatic picture settings that allow you to adjust the video display easily.
Picture
Mode
Adjust
Color Tone
DNIe
Move Select Menu
Custom
Custom
On
Picture
Mode
Adjust
Color Tone
DNIe
Move Select Menu
Dynamic
Custom
On
40
1 Press the MENU button, then press the ENTER
button.
2 Press the UP or DOWN button to select “Adjust”,
then press the ENTER button.
You will also see the items “Contrast”, “Brightness”,
“Sharpness”, “Color” and “Tint”.
3 Press the UP or DOWN button to select the item you
wish to change.
4 Press the LEFT or RIGHT button to change the value
of the item.
5 Press the MENU button to exit.
Note
• In the PC/DVI mode, you can’t adjust the Color and Tint.
Picture
Mode
Adjust
Color Tone
DNIe
Move Select Menu
Custom
Custom
On
Picture
Mode
Adjust
Color Tone
DNIe
Move Enter Menu
Custom
Normal
On
Adjust
Contrast
Brightness
Sharpness
Color
Tint R 50 G 50
Move Adjust Menu
80
50
50
50
82 Contrast
➤ ➤ Quick way to access the picture setting: Just press the “P.MODE”
button under the cover of the remote control.