Samsung SPN4235X-XAA - Manual (Page 8)

1 Remove the screws on the rear of the PDP panel.
2 Connect Insulation holders to screws. (see the illustration below)
3 Tighten the screws connected to the Insulation holders on the rear of the PDP panel.
15
Wall Installation Instructions
1 Do not install the PDP in any location other than a vertical wall.
2 To protect the performance of the PDP and prevent problems, avoid the following
places.
• Do not install next to smoke and fire detectors.
• Do not install in an area subjected to vibration.
• Do not install in an area subjected to high voltage.
• Do not install near or around any heating apparatus.
3 Use only recommended parts and components.
14
Screws ; 4 EA Insulation holders ; 4 EA
Installation Notes
Parts
( Wall attachment panel is sold separately. Check with your dealer )
Fixing the PDP panel to the wall attachment panel bracket
Removing four screws
Connecting four screws
Wall attachment panel