Samsung SC-M105S-XAC - Manual (Page 39)

ENGLISH
[ ▲ ]
[ ▼ ]
◆
◆
◆
◆
✤
✤
✤
The button and switch you use when playing the video file
[OK] Button: Play or pause the video file
[
▲ ] Switch: In <Video Play> mode: Press it to move to previous
file. Press and hold it to use RPS function.
(RPS rate: -x2, -x4, -x8, -x16, -x32, -x64, -x128)
[ ▼ ] Switch: In <Video Play> mode: Press it to move to next file.
Press and hold it to use FPS function.
(FPS rate: x2, x4, x8, x16, x32, x64, x128)
In <Video Play> mode:Press it and hold it to play
slowly when paused. Press it to move to the next
frame when paused.
Adjusting the Sound
1. Press the [OK] button to play the video file.
2. Press the [+] button to increase the volume.
◆ Each time you press the [+] button, the
volume bar increases and the sound level will
get louder.
◆ The volume bar disappears after 1~2 seconds.
3. Press the [-] button to decrease the volume.
◆ Each time you press the [-] button, the
volume bar decreases and the sound level
will get quieter.
◆ The volume bar disappears after 1~2 seconds.
Notes
✤ You can adjust the volume up to 10 steps.
✤ You can also play the video file on a TV screen by connecting the
CAM to a TV. (Refer to page 106)
✤ You must install the ImageMixer software (see page 110) to
playback video files recorded on the CAM on your PC.
1
2
Video Mode : Playing
ENGLISH
39 39
00:01 / 00:16
Video Play 100-0056
00:01 / 00:16
Video Play 100-0056