Embedded board bios setup, A.1 entering setup – Acnodes PC 8150 User Manual

Page 42

Advertising
background image

28

Appendix

PC 8150 User’s Manual

A p p e n d i x A

EMBEDDED BOARD
BIOS Setup

Appendix A describes the different settings available in the Award
BIOS that comes with the EMBEDDED BOARD CPU card. Also, the
instructions on how to set up the BIOS configuration are contained in
this chapter.

A.1

Entering Setup

There are two ways to enter the Setup program. You may either turn

ON the computer and press <Del> immediately, or press the <Del>

and/or <Ctrl>, <Alt>, and <Esc> keys simultaneously when the

following message appears at the bottom of the screen during POST

(Power on Self Test).

TO ENTER SETUP PRESS DEL KEY

If the message disappears before you respond and you still want to

enter Setup, please restart the system to try it again. Turning the

system power OFF and ON, pressing the “RESET” button on the

system case or simultaneously pressing <Ctrl>, <Alt>, and <Del> keys

can restart the system. If you do not press keys at the right time and

the system doesn’t boot, an error message will pop out to prompt you

the following information:

PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER SETUP

Advertising