Acnodes PC 8150 - Manual (Page 69)

Appendix 55
PC 8150 User’s Manual
Appendix B
Power Supply Specification
B.1 Power Supply: FSP180-50PLA1 (180W,
AC 110~230V Input)
B.1.1 ELECTRICAL REQUIREMENTS
OUTPUT ELECTRICAL REQUIREMENTS
The subject power supply will meet all electrical specifications below,
over the full operation temperature range and dynamic load
regulation.
OUTPUT RATING
Output Nominal Regulation Min Max Ripple/Noise
1 +3.3V ±5% 50mV 0.3A 16.8A
2 +5V ±5% 50mV 0.3A 12.0 A
3 +12V ±5% 120mV 1.5A 10.0 A
4 -12V ±10% 120mV 0.0 A 0.8A
5 +5VSB ±5% 50mV 0.0 A 2.0A
※ –12V,+3.3V, +5V,+12V will have the regulation to ±10% when all
load take off.
The +3.3V and +5V total output shall not exceed 61 watts. The +3.3.V,
+5V, and +12V total output shall not exceed 160 watts and the total
output for this subject power supply is 180 watts.