Samsung EV-NX20ZZBSBUS - Manual (Page 121)

120
Wireless network >
Using Auto Backup to send photos or videos
•
If the PC supports the Wake on LAN (WOL) feature, you can turn on the
PC automatically by searching for the PC from your camera. (p. 124)
• When you connect the camera to the WLAN, select the AP that is
connected to the PC.
•
The camera will search for available access points even if you are
connecting to the same access point again.
•
If you turn off the camera or remove the battery while sending files, the file
transfer will be interrupted.
• While you are using this feature, only [Power] is available on your camera.
•
You can connect only one camera to the PC at a time for sending files.
•
The backup may be canceled due to network conditions.
•
Photos or videos can be sent to a PC one time only. Files cannot be sent
again even if you reconnect your camera to another PC.
•
When there are no files in the camera memory, you cannot use this feature.
•
You must turn off Windows Firewall and any other firewalls before using this
feature.
•
You can send up to 1,000 files.
•
On the PC software, the server name must be entered in the Latin alphabet
and can contain no more than 48 characters.