Samsung EV-NX20ZZBSBUS - Manual (Page 81)

80
Shooting Functions >
Flash
Adjusting the flash intensity
Adjust the flash intensity to avoid overexposure or underexposure.
You can adjust it ±2 levels.
To set the flash
intensity,
In Shooting mode, press [ f] →
Flash
→
an option
→
[ D] →
scroll the jog dial or rotate the navigation button, or
press [ C/F].
Flash Option
Back Reset
Flash : Fill in
•
Adjusting the flash intensity may not be effective when:
-
the subject is too close to the camera
-
you set a high ISO sensitivity
-
the exposure value is too big or too small
•
In some shooting modes, you cannot use this function.
•
If you use the built-in flash, press the flash pop-up button and open the
built-in flash to adjust the flash intensity.
• If you attach an intensity-adjustable external flash to the camera, the
intensity settings of the flash will be applied.
•
If the subject is too close when you use the flash, some light may be
blocked, resulting in a dark photo. Ensure that the subject is within the
recommended range, which varies by lens.
•
When a lens hood is attached, the light from the flash can be blocked by
the hood. Remove the hood to use the flash.