Samsung SPH-M500BKMEID - Manual (Page 147)

Section 2H: Using Your Phone’s Voice Services 123
V
o
ice Ser
vices
Using Check <Item>
You can have the phone play back and display information about its current
state, including its phone number, current signal strength, network
coverage, and battery level.
To see and hear status information:
1. Press and hold .
2. Say “Check” followed immediately by one of the following items:
Ⅲ Status: plays back and displays ALL status information.
Ⅲ Signal: plays back and displays current signal strength.
Ⅲ Network: plays back and displays current network coverage.
Ⅲ Battery: plays back and displays the current level of battery
charge.
Ⅲ My phone #: plays back and displays your phone number.
For example, say “Check Status.” The phone responds by playing back
and displaying the message “Battery…Low.” You can also say “Check” by
itself. The phone prompts you to say one of the valid status items.
Coverage No Coverage - When handset is scanning.
Qwest Coverage - Handset is on a non-roam system.
Digital Roam - Handset is on a digital roam system.
Signal Strength High - Number of bars displayed is 5 or more.
Good - Number of bars displayed is 3-4.
Low - Number of bars displayed is 0-2.
No Signal - Handset is scanning for system.
Battery High - Number of bars displayed in the battery icon is 3.
Medium - Number of bars displayed is 2.
Low - Number of bars displayed is 1.
Empty - Low battery alert.
a500.book Page 123 Thursday, November 2, 2006 10:57 AM