Samsung SPH-M500BKMEID - Manual (Page 46)

22 Section 2A: Phone Basics
Installing the Battery
To install the Li-Ion battery:
1. Insert the battery into the opening on the back of the phone at a 45-
degree angle, making sure to line up the gold contacts. Gently press
down until it snaps into place.
2. Install the protective cover by lining up the tabs and gently sliding
the cover up until it snaps into place.
Removing the Battery
To remove your battery:
1. Remove the protective cover by pressing the release notch and
sliding the cover down.
2. Lift the battery up and out at a 45-degree angle.
a500.book Page 22 Thursday, November 2, 2006 10:57 AM