Samsung SCH-R261BSAXAR - Manual (Page 86)

82
Ending Calls Before Restarting Voice SVC
When you use Voice SVC to make a call, you must end that call
before you can use Voice SVC again.
Voice Settings
Choice Lists
Voice SVC uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
You can change the way that Voice SVC uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” Voice SVC
displays a choice list only when it is not confident it has correctly
recognized the name or number.
To change the way Voice SVC uses choice lists:
1. In standby mode, press Menu ➔ Voice SVC and
select Voice Settings ➔ Choice Lists.
2. Select the preferred Choice List behavior:
• Automatic—Voice SVC displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On—Voice SVC always displays a choice list, even when
there is only one choice.
• Always Off—Voice SVC never displays a choice list.
Sensitivity
1. In standby mode, press Menu ➔ Voice SVC, then
select Voice Settings ➔ Sensitivity. The Sensitivity
screen displays on the screen.
2. Use the Navigation key to adjust the selected Sensitivity
setting toward Reject More spoken commands or names
or toward Reject Less spoken commands or names.
3. Press to accept the new setting.
Digit Dialing
If you regularly have trouble with Voice SVC not recognizing the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
Digit Dialing to factory defaults. (For more information, refer to “Reset
Digits” on page 83.)
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.