Samsung SCH-R261BSAXAR User Manual

Page 87

Advertising
background image

Tools 83

Tips for Adapting Digit Dialing

Use Adapt Digits in a quiet place.

Make sure you wait for the beep before starting to speak.

Speak clearly, and say each digit distinctly.

If you make a mistake while recording a sequence of digits, or if there

is an unexpected noise that spoils the recording, re-record that
sequence.

Only adapt digits if you are regularly having problems with digit dialing.

Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)

Adapt Digits

To adapt digit dialing, do the following:

1.

In standby mode, press

Menu

Voice SVC, then

select Voice Settings

Digit Dialing

Adapt Digits.

2.

Press OK to begin the adapt digits process.

Your phone displays the first digit sequence and “Please
say
” plays through the speaker followed by the four digits
displaying on the screen.

3.

Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”

If the recording was good, say “Yes.”

If you need to re-record, say “No.”

If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.

Repeat this step until you’re satisfied with the recording.

4.

After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.

5.

After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”

6.

Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete
” plays through the speaker and you are returned
to the Adapt Digits menu.

Reset Digits

To reset digit dialing to factory default settings, do the following:

1.

In standby mode, press

Menu

Voice SVC

sub-menu, select Voice Settings

Digit Dialing

Reset Digits.

The phone prompts you to confirm digit reset.

2.

Press the OK soft key to reset your digit adaptation.

Advertising
This manual is related to the following products: