Samsung WF457ARGSGR-AA - Manual (Page 23)

Installing your washer _23
01
INS
TALLING Y
OUR W
ASHER
STEP 4
Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
1. Slide the washing machine into position.
2. Loosen all the lock nuts with the supplied wrench.
3. Level your washing machine by turning the levelling feet in
and out as necessary by hand.
4. When your washing machine is level, tighten the locking
nuts using a wrench or flathead screwdriver.
Your washer must be level on all four sides. A carpenter’s level should be used on all four
corners of your washer. It’s a good idea after the first dozen washes to make sure your
washer is still level.
Avoid damage to the legs. Do not move the washer unless the locking nuts are fastened to
the bottom of the washer.
WF457ARG-03153A-07_EN.indd 23 2013-12-13 10:40:21