Samsung SGH-T999MBBTMB - Manual (Page 129)

Important! Remember to manually place the cursor in the
correct spot and enter a Domain name before the
“[Domain]\[user name]” entry. Most servers only
provide a username.
8. Update or re-enter your Exchange server information
within the appropriate field. This field can often be
populated with incorrect or out of date information
provided by your server.
• Exchange Server: your exchange server remote email
address. Typically starts with mail.XXX.com. Obtain this
information from your company network administrator.
Important! Do not accept the default entry as this is a guess
based on returned information.
• If your network requires SSL encryption, tap the Use secure
connection (SSL) field to place a check mark in the box and
activate this additional level. Most often, this option should be
enabled.
Important! If your Exchange server requires this feature,
leaving this field unchecked can prevent
connection.
9. Consult your IT Administrator if it is necessary to
enable the Use client certification option.
10. With the new server information entered, tap Next.
11. Read the on-screen Activation disclaimer and, when
prompted, tap OK. The device then verifies your
incoming server settings.
12. If prompted, read the Remote security administration
information and tap OK to accept the service and
continue.
13. Adjust the various on-screen configuration fields and
tap Next. It may take a few seconds for the next screen
to load.
• Enabling the Automatically download attachments when
connected to Wi-Fi option decreases the wait time to access
large email attachments.
Messages 122