Samsung SGH-T999MBBTMB - Manual (Page 229)

Install certificates
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
2. Press and then tap Advanced.
3. Tap Install certificates and follow the on-screen
instructions.
Finding your WI-Fi Address Information
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
2. Press and then tap Advanced.
3. Locate the MAC Address and IP Address information at
the bottom of the screen.
• MAC address: view your device’s MAC address, required
when connecting to some secured networks (not configurable).
• IP address: view your device’s IP address.
WPS Push Button
The WPS (Wi-Fi Protected Setup) feature (sometimes
associated with a physical or on-screen button on most
WAPs) allows you to pair your device and WAP without the
need for entering a passcode. This process is similar to Wi-Fi
Direct pairing.
In this case, once the WPS feature is active on your WAP,
your device can then detect it and then immediately pair to it.
Note: WPS-capable routers appear in the Wi-Fi list of available
devices with the term (WPS available) below their name.
To pair your device using WPS:
1. Follow the WPS activation instructions specific to your
Wireless Access Point.
2. From the main Settings page, tap Connections tab ➔
Wi-Fi.
3. Press then tap WPS push button.
4. Once the connection is complete, confirm the external
router now appears in the Wi-Fi list as connected.
Changing Your Settings 222