Samsung SPP4231X-XAP - Manual (Page 69)

69
Notes
Both screen position and size will vary, depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
• The interlace mode is not supported.
• The PDP operates abnormally if a non-standard video format is selected.
• This sheet conforms to IBM/VESA regulations and is prepared on the basis of Analog Input.
• The DVI Mode is supported same as above table.
Notes
• When this PDP is used as a PC display, 32-bit color is supported.
• Depending on the manufacturer, your PC display screen might appear different.
(and depending on your particular version of Windows.)
Check your PC instruction book for information about connecting your PC to a PDP.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHZ
(horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power
is turned off (or if the PC is disconnected). If so, press the TV/VIDEO button on the remote control
or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is
connected.
• Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise,
random signals might appear).
Video Signal
IBM PC / AT
Compatible
Resolution
(Dot X Line)
Vertical
Frequency(Hz)
640 X 350
640 X 400
640 X 480
800 X 600
848 X 480
1024 X 768
70.086
85.080
85.080
59.940
72.809
75.000
85.061
56.250
60.317
72.188
75.000
85.061
60.000
72.000
75.000
60.004
70.069
75.029
84.997
Horizontal
Frequency(KHz)
31.469
37.861
37.861
31.469
37.861
37.500
43.269
35.156
37.897
48.077
46.875
53.674
29.838
36.072
37.650
48.363
56.476
60.023
63.677
Vertical
Polarity
N
N
P
N
N
N
N
N/P
P
P
P
P
N
N
P
P
Horizontal
Polarity
P
P
N
N
N
N
N
N/P
P
P
P
P
N
N
P
P
nVidia chipset
(N: Negative / P: Positive)
BN68-00631B-00_062-075Eng 2004.6.9 11:0 AM Page 69