Samsung SPP4231X-XAP - Manual (Page 88)

88
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue screen automatically replaces
the noisy picture background. If you wish to continue viewing the poor picture, you must set
the “Blue Screen“ mode to “Off“.
1 Press the MENU button. Press the ▲ or ▼ button to
select “Setup”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “Miscellaneous”,
then press the ENTER button.
3 Press the ▲ or ▼ button to select “Blue Screen”,
Press the ENTER button.
4 Press the ▲ or ▼ button to select “On” or “Off”,
then press the ENTER button.
5 Press the MENU button to exit.
Language : English √
Time √
Caption √
Digital NR : On √
V-Chip √
Miscellaneous √
PC √
Setup TV
Move Enter Return
➤ ➤
Blue Screen is displayed when there is no signal from an external
device in the External Mode, regardless of the Blue Screen Setting.
Melody : On √
Plug & Play √
Blue Screen : On √
Miscellaneous TV
Move Enter Return
Melody : On
Plug & Play
Blue Screen : On
Miscellaneous TV
Move Enter Return
Melody : On
Plug & Play
Blue Screen : On
Miscellaneous TV
Move Enter Return
Off
On
Off
On
BN68-00631B-00_076-103Eng 2004.6.9 11:2 AM Page 88