Samsung SGH-T469DAATMB - Manual (Page 118)

115
You can modify the way Nuance uses the confirmation list in the settings. Each time Nuance activates you can
choose to view the confirmation list even if there is only one choice. Additionally, you can choose never to view a
confirmation list, even if there are multiple choices. When the name or number you speak is not recognized, the
Automatic setting displays the confirmation list.
1. In Idle mode, press Menu ➔ Organizer ➔ Voice recognition.
After a brief pause, a list of available commands displays on the screen along with the “Say a command”
message.
2. From the “Say a command” screen, press Settings ➔ Confirmation.
3. Select one of the following options:
• Automatic: Nuance displays a confirmation list only when it is not sure if it has correctly recognized the name or number.
• Always Confirm: Nuance always displays a confirmation list, even when there is only one choice.
• Never Confirm: Nuance never displays a confirmation list.
Adaptation
If Nuance frequently does not recognize your commands, adapting digit dialing to your voice improves the accuracy
of digit recognition.
After you adapt Digit Dial, your phone recognizes only your voice. Other users are not able to use the handset with
Nuance unless the handset is reset to factory defaults.
Adapting requires recording multiple sequences of digits. The entire adaptation process takes approximately one
minute.
1. In Idle mode, press Menu ➔ Organizer ➔ Voice recognition.
After a brief pause, a list of available commands displays on the screen along with the “Say a command”
message.
2. From the “Say a command” screen, press Settings ➔ Adaptation.
3. Press Adapt Voice.
4. The screen displays an adaptation message. The entire adaptation process takes just a couple of minutes to
complete.
t469.book Page 115 Friday, July 10, 2009 11:05 AM