Samsung SGH-T959HAVTMB - Manual (Page 179)

Changing Your Settings 174
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
ᮣ Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Bluetooth settings and tap
Bluetooth to turn it on.
Note: Bluetooth must be enabled prior to use.
Activating the Device Name
1. Activate Bluetooth.
2. Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Bluetooth settings ➔ Device name.
The assigned device name displays.
3. Press to erase the current device name and enter a
new name for this device using the keyboard.
4. Tap OK to confirm your setting.
Activating Visibility
ᮣ Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Bluetooth settings ➔ Visible.
The phone is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the
phone becomes undiscoverable again.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1. Press ➔ and then tap (Settings) ➔
Wireless and network ➔ Bluetooth settings ➔
Scan devices.
Your phone begins scanning and lists any discovered
devices in the Bluetooth devices section.
2. Tap a device name to pair with the device.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required, and
tap OK.