Samsung SGH-T959HAVTMB - Manual (Page 30)

25
For more details on configuring your phone’s settings, see
“Changing Your Settings” on page 172.
Displays when Bluetooth technology is active and
enabled.
Displays when the Bluetooth technology is active
and communicating with an external device.
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active and there is an available
open wireless network.
Displays when the Mobile AP Hotspot feature is active
and communicating. For more information, refer to
“Mobile AP” on page 166.
Displays when the USB Tethering feature is active and
communicating. For more information, refer to
“Tethering” on page 175.
Displays when the phone’s location feature is on
and available for location-based services such as
GPS Navigation.
Displays when your phone’s GPS is on and
communicating.
Displays when the Wi-Fi calling feature is active and
in use.
Displays when the external SD card (internal
microSD) has been disconnected (unmounted) from
the phone and is now ready for either removal or
formatting.
Displays when the External SD card is being prepared
for mounting to the device. This is required for
communication with the External SD card.
Displays when the phone has detected an active USB
connection and is in a USB Debugging mode or the
microSD card has been improperly removed.