Samsung SPH-M910ZIASPR - Manual (Page 54)

42 1B. Settings
Vibrate
To set your device to vibrate for incoming calls and silent
for notifications:
ᮣ Press the volume button down in standby mode
until you see
on the screen.
To set your device to always vibrate for incoming calls:
1. Press > and tap > Sound &
display .
2. Tap Phone vibrate . (If you have already checked the
option, tapping it again deselects the option.)
To set your device to vibrate while using the dialpad:
1. Press > and tap > Sound &
display .
2. Tap Haptic feedback . (If you have already checked
the option, tapping it again deselects the option.)
Silence All
The Silence All option allows you to mute all sounds
without turning your device off (except for Media
volume).
To activate Silence All:
ᮣ Press and hold the volume button down in standby
mode until you see
on the screen.
To deactivate Silence All:
ᮣ Press the volume button up repeatedly to select a
volume level.
To set your device to silent mode:
1. Press > and tap > Sound &
display .
2. Tap Silent mode . This option silences all audio on
the device except for media and alarms. (If you
have already checked the option, tapping it again
deselects this option.)
SPH-M910_BasicsGuide.book Page 42 Wednesday, June 9, 2010 3:56 PM