Samsung SPH-M910ZIASPR - Manual (Page 59)

1B. Settings 47
Settings
your TTY device manufacturer to purchase the
connector cable.
To turn TTY Mode on or off:
1. Press > and tap > Call settings >
TTY. (You will see an informational message.)
2. Read the onscreen disclaimer and tap Yes .
3. Touch TTY Off to turn TTY mode off.
– or –
Touch any of the following to enable the feature:
Ⅲ TTY HCO, TTY VCO, or TTY Full .
To access the state Telecommunications Relay Service
(TRS) for assistance with TTY calls:
ᮣ Dial to reach an
operator.
For additional information about Sprint Relay Services
and TTY compatibility, call Sprint Relay Customer
Service at
800-676-3777 or visit www.sprintrelay.com .
For additional technical support you may call
1-888-987-4357 , or access the following website:
www.samsung.com/us/consumer/learningresources/
mobile/accessibility/pop_accessibility.html.
PQRS
Note: In TTY Mode, your device will display the TTY access
icon.
If TTY mode is enabled, the audio quality of non-TTY
devices connected to the headset jack may be
impaired.
WARNING: 911 Emergency Calling
Sprint recommends that TTY users make
emergency calls by other means, including
Telecommunications Relay Services (TRS),
analog cellular, and landline communications.
Wireless TTY calls to 911 may be corrupted
when received by public safety answering points
(PSAPs), rendering some communications
unintelligible. The problem encountered appears
related to software used by PSAPs. This matter
has been brought to the attention of the FCC,
and the wireless industry and the PSAP
community are currently working to resolve this.
SPH-M910_BasicsGuide.book Page 47 Wednesday, June 9, 2010 3:56 PM