Samsung SC-D67-XAA - Manual (Page 53)

49
ENGLISH
Advanced Recording
● DATE/TIME
✤ The DATE/TIME function works in both CAMERA and PLAYER mode.
✤ The date and time is automatically recorded on a special data area of the tape.
✤ You can choose what you want to display - either the date, the time or both.
■ DATE only
■ TIME only
■ DATE/TIME
1. Press the MENU ON/OFF button.
■ The menu list will appear.
2. Turn the MENU DIAL to DATE/TIME.
3. Press ENTER to enter the sub-menu.
4. Using the MENU DIAL, select the DATE/TIME mode.
■ Press ENTER to confirm the DATE/TIME mode and return to the main menu.
■ If you exit the sub-menu without pressing ENTER, the DATE/TIME mode is not changed.
5. To exit, press the MENU ON/OFF button.
Notes
■ The DATE/TIME is not affected by the OSD ON/OFF (ENTER) button.
■ The DATE/TIME will read “– – – ” in the following conditions.
– During playback of a blank section of tape.
– If the tape was recorded before setting the DATE/TIME in the camera’s memory.
– When the Lithium Battery becomes weak or dead.
(MENU) SP STBY
REC LAMP ...............OFF
WIND CUT ...............OFF
AUDIO MODE ..........12 BIT
PHOTO MODE .........FIELD
DISPLAY...................LCD
DATE/TIME .............OFF
: MENU
● DATE/TIME ● SP STBY
OFF
DATE
TIME
DATE/TIME
SEL.:ENTER
: MENU