Samsung SGH-T999MBATMB - Manual (Page 159)

Multimedia 153
Settings (continued):
Focus mode: allows you to set this option to Auto focus
or Macro. Use Auto focus for all other focal situations.
Timer: allows you to set a timer for how long to wait
before taking a picture. Options include: Off, 2 sec, 5
sec, and 10 sec.
Effects: allows you to change the color tone or apply
special effects to the photo. Options include: None,
Negative, Black and white, Sepia, Washed out, Cold
vintage, Warm vintage, Posterize, Solarize, Blue
point, Green point, or Red-yellow point.
Resolution: allows you to set the image size to either:
8M (3264x2448), W6M (3264x1836),
3.2M (2048x1536), W2.4M (2048x1152),
W0.9M (1280x720), or 0.3M (640x480).
White balance: allows you to set this option to one of
the following choices: Auto, Daylight, Cloudy,
Incandescent, or Fluorescent.
Settings (continued):
ISO: ISO determines how sensitive the light meter is
on your digital camera. Choose from Auto, 100, 200,
400, or 800. Use a lower ISO number to make your
camera less sensitive to light, a higher ISO number to
take photos with less light, or Auto to let the camera
automatically adjust the ISO for each of your shots.
Metering: allows you to set how the camera measures
or meters the light source: Centre-weighted, Spot, or
Matrix.
Anti-Shake: compensates for camera movement.
Auto contrast: provides a clear image even under
backlight circumstances where intensity of
illumination can vary excessively.
Guidelines: allows you to turn the guidelines On or Off.
Image quality: allows you to set the image quality to:
Superfine, Fine, or Normal.
GPS tag: allows you to turn GPS On or Off (also known
as Geotagging). The location of where the picture is
taken is attached to the picture. (Only available in
Camera mode.)