Samsung SGH-T999MBATMB - Manual (Page 202)

196
To activate AllShare Cast on your device:
1. Press ➔ and then tap Settings ➔
More settings ➔ AllShare Cast.
2. If not already on, touch and slide the AllShare Cast
slider to the right to turn it on . The slider
color indicates the activation status.
Pairing AllShare Cast Hub
To pair your device and Hub for the 1st time:
1. Locate the AllShare Hub (dongle) name displayed at the
bottom of the TV (showing the tutorial).
Ex: Name: Dongle - XXXXXX.
2. Access your device’s AllShare Cast screen and locate
the same hub/dongle name in the list.
• Tap Scan if your AllShare Cast Hub (dongle) does not appear in
the list.
3. Verify your AllShare Cast Hub is on (blinking red LED)
and the on-screen tutorial is displaying on the
connected TV.
Note: The AllShare Cast Hub communicates with your paired
device via a Wi-Fi Direct connection.
4. For a first time connection:
• Press the RESET button (located at the rear of the hub) once
and only for a second until the LED turns solid BLUE .
• Quickly tap the hub name entry on your device’s AllShare Cast
screen.
5. Verify (AllShare Cast Hub Communicating) appears
at the top of the device’s screen.
6. Confirm the connection by making sure both your TV
and device show the same image/screen and
(Wi-Fi Direct Communicating) now displays on the
device.
Important! The AllShare Cast Hub is a 1-to-1 connection. If a
previous device was paired to the Hub and is still
connected to the AllShare Cast Hub, you can not
pair a new device until the first connection is
stopped.
To disconnect your device from the hub:
1. Access your device’s AllShare Cast screen and locate
the current connection.
2. Tap the entry and select End connection.
ON