Samsung SGH-T999MBATMB - Manual (Page 291)

Changing Your Settings 285
Audible System Tone Settings
These options are used when you use the dialing pad, make
a screen selection, lock your screen, or tap the screen. Each
time you press a key or make a selection the selected tone
sounds.
1. Press ➔ and then tap Settings ➔ Sound.
2. Tap Keytones to activate a tone when you use on-
screen keys. A check mark displayed next to these
features indicates active status.
3. Tap Touch sounds to activate a tone when you touch the
screen. A check mark displayed next to this feature
indicates active status.
4. Tap Screen lock sound to activate a tone when you use
the Lock screen. A check mark displayed next to this
feature indicates active status.
5. Tap Haptic feedback to activate the a vibration when
you press soft keys on certain screens. A check mark
displayed next to the feature indicates this feature is
active.
6. Activate Auto haptic to allow your device to
automatically vibrate in response to the sounds of
downloadable apps, such as games. In a single motion,
drag the slider to the right to turn it on .
Display Settings
In this menu, you can change various settings for the display
such as the font, orientation, pop-up notifications, puzzle
lock feature, animation, brightness, screen timeout, and
power saving mode.
Adjusting the Screen Display
1. Press ➔ and then tap Settings ➔ Display.
2. Configure the following screen display settings:
• Brightness: adjusts the on-screen brightness level. For more
information, refer to “Adjusting Screen Brightness” on
page 286.
• Screen timeout: adjusts the delay time before the screen
automatically turns off. Selections are: 15 seconds,
30 seconds, 1 minute, 2 minutes, 5 minutes, and
10 minutes.
• Smart stay: tap this option to disable the screen timeout if your
device detects that your face is watching the screen.
ON