Samsung SCH-R400ZPAMTR - Manual (Page 111)

Multimedia 111
Using My Sounds Gallery
Tip: You can also access My Sounds (from standby mode) by pressing and holding until the phone
prompts, “Say a command.” Say “Go To Multimedia” into the microphone. The Multimedia menu
appears in the display. Press
for My Sounds.
The following options appear in the display:
• Record New — Lets you record voice memos.
• A list of recorded voice memo files and melodies.
2. Use the navigation keys to highlight a file.
3. When you highlight Record New and press the key, the Record New
screen appears in the display.
• Press the REC key ( ) to start recording a voice memo.
• Press the Pause (left) soft key ( ) to pause/resume recording.
• Press the SAVE key ( ) to stop recording and save the voice memo.
4. When you highlight a saved voice memo file, you have the following
options:
• Press the Erase (left) soft key ( ) to erase the selected voice memo file, if it is
unlocked.
• Press the PLAY key ( ) to listen to the voice memo.
• Press the Options (right) soft key ( ), and the following options appear in the
display:
– Send — Send to someone as part of a Picture message. (See “Send Picture
Messages in Standby Mode” on page 75 for more information.)
– Rename — Change the name of the voice memo file.
– Lock / Unlock — Block/permit erasure of the highlighted image.
– Erase all — Erase all unlocked voice memos.
– Sound Info — Shows the title, size, type, and date for the file.
5. When you highlight a melody file, you have the following options:
• Press the PLAY key ( ) to hear the ringtone.
• Press the Options (right) soft key ( ) to show the following options:
– Send — Send to someone as part of a Picture message. (See “Send Picture
Messages in Standby Mode” on page 75 for more information.)
– Set As — assign the highlighted ringtone to be used as a Ringtone, Contact
ID, or as the Alert Tone.
– Erase all — Erase all unlocked melodies.
– Sound Info — Shows the title, size, type, and date for the file.
6. Press the key to return to the previous menu, or press the
key to return to standby mode.
OK
OK
OK
OK
OK
CLR
END