Samsung SCH-R400ZPAMTR - Manual (Page 51)

Understanding Your Contacts 51
Contacts
Contacts
Up to 500 entries can be stored in Contacts. Each entry can have up to five
associated phone numbers and one e-mail address. Each phone number can be up
to 32 digits in length, including 2-Sec or Wait pauses (see “Manual Pause Calling”
on page 25 for more information), and associated names can be up to 32 characters
in length. You can assign the Speed Dial numbers of your choice for each entry. You
can also mark your Contacts list as Restricted to prevent unauthorized viewing. (See
“Restriction” on page 139 for more information).
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch Dialing allow you to call
numbers stored in Contacts faster.
Open Contacts
1. In standby mode, press the MENU key ( ), then press for
Contacts. The following options appear in the display:
• Find — Find a phone number By Name.
Tip: You can also access the Find option from standby mode, by pressing the Contacts (left) soft key
( ).
• Add New Entry — Add a number or e-mail address to your Contacts.
• Speed Dial — Assign a Contacts entry to a Speed Dial number. (See “Speed
Dial” on page 60 for more information.)
• Group — Review, send messages to, add Contacts to, or rename four out of
your five groups. (See “Contacts Groups” on page 62 for more information.)
• Memory Info — Display used and available memory for Contacts entries.
Tip: To launch the Contacts menu using a voice command — In standby mode, press and hold until
the phone prompts, “Say a command.” Say “Go to Contacts” into the microphone.
2. Use the navigation keys to highlight the option of your choice, and press
the
key.
Tip: You can also press the keypad number key that corresponds to the menu option number.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Lookup command to view contact information for any named
contact stored in your Contacts list by saying the name.
OK @
OK