Samsung SCH-R400ZPAMTR - Manual (Page 95)

Voice SVC 95
Voice Settings
3. Press the key or the OK (left) soft key ( ) to accept the new
setting. Press the key to discard the new setting and return to the
Voice Settings menu.
Sensitivity
1. In standby mode, press the MENU key ( ), then press (for Voice
SVC), (for Voice Settings), and for Sensitivity.
2. Use the Up and Down navigation keys to adjust the selected Sensitivity
setting incrementally between Reject More spoken commands or names
and Reject Less spoken commands or names.
3. Press the key or the OK (left) soft key ( ) to accept the new
setting. Press the key to discard the new setting and return to the
Voice Settings menu.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the numbers you say, try
adapting digit dialing to your voice. Adapting can improve the accuracy of digit
recognition, especially for people with strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will not
be able to use it unless they reset the phone to factory defaults.
Adaptation involves recording several sequences of four digits each. The recording
process takes about a minute.
Tips for Adapting Digit Dialing
• Use Adapt Digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.
• Only adapt digits if you are regularly having problems with digit dialing. Once you
adapt, digit dialing will not work as well for other people using your phone. (You
can always reset digit adaptation to its original state, as described below.)
OK
CLR
OK
OK
CLR