故故障 障排 排除 除: : 自 自我 我診 診斷 斷顯 顯示 示, Troubleshooting : self-diagnosis display, English – Samsung HMX-S10BN-XAA User Manual

Page 148

Advertising
background image

ENGLISH

148

148

故障

障排

排除

除:

: 自

自我

我診

診斷

斷顯

顯示

數位縮放無法操作

無法刪除儲存在小型 SD

賓內的圭案
LCD 顯示器上的影像太暗0

無法操作播放/ 後退和
前進0
無法播放記憶賓

(相片模式)

完全按下 [Record / Stop]
按瞿時沒有拍攝相片0

無法啓動內建閃光燈

無法錄製影片
LCD 顯示器自動關閉0

最大錄製時間和相片容量
與規格不一樣0

無法播放聲訊和視訊0

檢視相片時沒有播放聲訊0

播放影片時出現馬賽克及/
或方塊狀的筮訊0

無法播放從電腦複製的資
料0
拍攝的 MPEG4 影片無法
在電腦上播放0

音樂圭案無法在相機上
播放0

連接至電視/ VCR 時,無
法播放聲訊/視訊0

OSD 沒有出現在電視顯示
器上0

未啓用數位效果0

小型 SD 賓受保護0
圭案受保護0
環境照明太亮0
環境照明太暗0

已選取相片模式0

已選取影片模式0

沒有足觀的可用記憶體空間0
記憶賓使用其他裝置格式化0

閃光燈模式設定爲 Off
已選取影片模式0
已選取相片模式0
爲了降低電能消耗,如果在特定時間
內(視操作模式而定)不操作任何按
瞿,LCD 顯示器和 Miniket Photo 的
電源將關閉,這種情況不是故障0

錄製/照明情況可能會影響錄製的大小0

資料圭案損毁

檢視相片模式不支援聲訊0

物體快速移動0
MPEG4 播放的自然現象0

資料圭案與支援的圭案格式不相容0

未正確安裝所需的驅動程式/應用程式
軟體0

資料圭案與支援的圭案格式不相容0

纜線連接不正確0
電視的 <Source> 設定不正確0
模式設定爲錄製模式0

視製造廠商而定,電視機可能不支援
螢幕上的文字顯示0

關閉數位效果,第 66 頁0

解除小型 SD 賓保護片0
解除鎖定受保護的圭案,第 84 頁0
調整 LCD 亮度,第 41 頁0
低溫可能會使 LCD 螢幕變暗0 這是正常
現象,橙非故障0
選取影片模式橙按下 [Shortcut 1] 按瞿0

選取相片模式橙按下 [Shortcut 1] 按瞿0

淸空小型 SD 賓以釋出記憶體空間0
格式化小型 SD 賓0

選擇不同的閃光燈模式,第 71 頁
閃光燈無法在影片模式中操作0
選取影片模式0
按下任何按瞿將可重新開啓 Miniket
Photo0
再次按下該按瞿將執行其原始功能0

這是正常現象,橙非故障0

靜電與强大的磁場可能會損毁儲存在小型
SD 賓上的資料0 請處理小型 SD 賓時請
務必小心0 損毁的資料將無法恢復0

這是正常現象,橙非故障0

這是正常現象, 橙非故障0 在電腦上播放
該影片時,央將可以正常播放0

不支援的圭案格式將無法播放0 這是正常
現象,橙非故障0
從隨附的 CD 安裝 所需的驅動程式/應用
程式軟體,包括轉碼器程0 第 137 頁0

音樂圭案的編碼格式可能與支援的圭案格
式不相容0 檢査音樂圭案0

檢査纜線連接,第 140 頁0
將電視機上的 <source> 設定爲外部輸入0
按下 [Shortcut1] 按瞿將模式設定爲播放
影片,第 140 頁0
將模式設定爲影片模式,第 139 頁0
這是正常現象,橙非故障0

症狀

可能

能的

的原

原因

採取

取的

的措

措施

Symptom

Possible Causes

Measure

Digital zoom does not
work.
Files stored in the mini SD
card can not be deleted.
Images on the LCD
monitor appear dark.

Play, rewind, and fast
forward do not work.
Mini SD card cannot play
back (Photo Mode)
No picture is taken when
[Record / Stop] button is
fully pressed.
Built-in flash will not go off

Cannot record a movie
LCD monitor turns off
automatically.

Maximum recording time
and photo capacity is
different than the
specifications.
Audio and Video does not
play back.

No audio plays when
viewing photos.
Movie plays with mosaic
and / or block-shaped
noise.
Data copied from a PC will
not play.
MPEG4 movie taken will
not play on a PC

Music files will not play on
the Miniket Photo.

Audio / Video will not play
when connected to a TV /
VCR.

OSD will not appear on
the TV monitor.

The digital effect is set enabled.

Mini SD card is protected.
The file is protected.
Ambient light is too bright.
Ambient temperature is too low.

Photo Mode is selected.

Movie Mode is selected.

Not enough free memory space.
Mini SD card was formatted using
another device.
Flash mode is set to Off
Movie Mode is selected.
Photo Mode is selected.
To save power consumption, the LCD
monitor and the Miniket photo goes
down if there is no button operation
for a certain period of time (depending
on the operation mode), which is not a
malfunction.
Recording / lighting conditions may
affect the size of the recordings.

Damaged data file.

Photo viewing does not support audio.

Subject is moving fast.
By the nature of MPEG4 playback.

Data file does not comply with the
supported file format.
Required driver / application software
are not properly installed.

Data file does not comply with a
supported file format.

Cable connection was done improperly.
The <Source> of the TV is set
improperly.

Mode is set to Recording mode.
TV set may not support on screen text
display depending on manufacturer.

Turn off the Digital Effects, page 66.

Release the mini SD card protection tab.
Unlock the protection of the file, page 84.
Adjust the LCD brightness, page 41.
Low temperature may produce a dark LCD
screen. It is normal, not a malfunction.
Select Movie Mode and press the
[Shortcut 1] button.
Select Photo Mode and press the [Shortcut
1] button.
Empty the mini SD card to make free
memory space.
Format the mini SD card.
Select different flash mode, page 71.
Flash will not work in Movie Mode.
Select Movie Mode.
Pressing any button will turn the Miniket
Photo back on.
Pressing the button once again will
operate its original function.

It is normal, not a malfunction.

Static electricity and strong magnetic fields
may damage the data stored in the mini
SD card. Be careful with handling the mini
SD card. Damaged data cannot be
recovered.
It is normal, not a malfunction.

It is normal. It is not malfunction. When
you play back the movie on a PC, it plays
back properly.
Non-supported file formats will not play. It
is normal, not a malfunction.
Install the required driver / application
software, including the CODEC from the
provided CD, page 137.
The encoding format of the music file may
not comply with a supported file format.
Check the music file.
Check the cable connections, page 140.
Set the <source> to external input on the
TV.
Set the mode to Movie play by pressing
the [Shortcut1] button, page 140.
Set the mode to Movie Play, page 139.
It is normal, not a malfunction.

Troubleshooting : Self-Diagnosis Display

Advertising
This manual is related to the following products: