Samsung SCH-U620ZKAVZW - Manual (Page 29)

Call Functions 29
VoiceSignal™
• Call Name Dialing
• Send Text Message
• Send Picture
• Name Lookup
• Opening Apps
• Checking Phone Status
To access the VoiceSignal Settings menu, follow these steps:
1. Press MENU. Use the navigation key to highlight Settings &
Tools and press .
2. Press Tools, then Voice Commands, and Voice Settings.
3. Use the navigation keys to select the setting you want to change. The
following options are available:
• Choice Lists: If VoiceSignal is not absolutely confident that it has correctly identified
a name or number, it can display a choice list of up to three possibilities, and
prompt you to confirm the correct one. You can control when choice lists appear by
changing the Choice Lists setting to the following:
• Automatic: VoiceSignal displays a choice list when it is not confident it has
identified the correct choice from among multiple alternatives.
• Always On: When there are multiple alternatives, VoiceSignal always displays a
choice list.
• Always Off: VoiceSignal never displays a choice list. Instead, the application
picks the best from among the possible choices.
• Sensitivity: In VoiceSignal, sensitivity controls the balance between rejecting too
much, which means the phone frequently does not recognize names, numbers, or
commands, and rejecting too little, which means it frequently recognizes something
even if nothing was said. When VoiceSignal rejects an utterance, it displays a
message such as “Please repeat…” or “No match found.” If you frequently
experience these messages, you might be able to get better recognition by
adjusting the Sensitivity setting toward Reject Less. If you frequently experience
false activations (VoiceSignal detects a wrong match), you might be able to get
better performance by adjusting the Sensitivity setting toward Reject More.
• Digit Dialing: Use the Digit Dialing menu to adapt digit dialing to your voice.
• Adapt Digits: Lets you adapt digits, which can improve speech recognition of
phone numbers. Adaptation takes about 60 seconds.
• Reset Digits: Erases any digit adaptation you have done and resets digit
recognition to the factory default. If you have not adapted digits, this option is
grayed out.