Samsung SCH-U620ZKAVZW - Manual (Page 84)

84
6. Press to perform the function for the highlighted option.
Edit Lock Code
The default lock code is the last four digits of your phone number. Edit Code allows
you to change this code to a lock code of your preference.
1. Press MENU, use the navigation key to highlight
Settings & Tools and press .
2. Press Phone Settings. The Phone Settings menus are listed in the
display.
3. Press Security. You’re prompted to enter the lock code. The default
lock code is the last four digits of your telephone number.
4. Press Edit Code.
5. At the “ENTER NEW LOCK CODE” prompt, enter the new lock code. You’re
prompted to confirm the new lock code.
6. “DEVICE CODE SET” message appears in the display confirming that your
lock code has been changed.
Tip: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Resetting Your Phone
Reset Phone returns all setup options to their factory default.
1. Press MENU, use the navigation key to highlight
Settings & Tools and press .
2. Press Phone Settings. The Phone Settings menus are listed in the
display.
3. Press , then press Security, and enter the lock code.
4. Press Reset Settings. A prompt appears in the display “RESET
DEFAULT SETTINGS? CONTACTS WILL NOT BE AFFECTED.”
5. Press Yes to restore default settings or press No to return to the Security
menu
.
System Select
The System Select menu allows you to set your roaming options. For information on
roaming options, see "Roaming Options" on page 27