Samsung SGH-T679DBWTMB - Manual (Page 174)

170
6. The external device must accept the
connection and enter your device’s PIN
code.
Once successfully paired to an external
device, displays in the Status area.
Note: Due to different specifications and features
of other Bluetooth-compatible devices,
display and operations may be different,
and functions such as transfer or exchange
may not be possible with all Bluetooth-
compatible devices.
Disconnecting a Paired Bluetooth
Device
Disconnecting a paired device breaks the
connection between the device and your phone,
but retains the knowledge of the pairing. At a
later point when you wish to reconnect the
device, there is no need to setup the connection
information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, touch
the previously paired device (from the
bottom of the page).
3. Tap OK to confirm disconnection.
– or –
From the Bluetooth settings page, touch
and hold the name of the previously paired
device, and select Disconnect.
Note: Disconnections are manually done but often
occur automatically if the paired device
goes out of range of your phone or it is
powered off.
Deleting a Paired Bluetooth Device
Deleting a device from your list removes its
“connection record” and upon reconnection
would require that you re-enter all the previous
pairing information.
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, touch
and hold the name of the previously paired
device (from the bottom of the page). This
opens the connected device’s menu
options.
3. Tap Unpair to delete the paired device.