Samsung SGH-T679DBWTMB - Manual (Page 188)

184
3. Tap Network notification again to remove
the check mark and deactivate this
feature.
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a
standard for easy and secure wireless network
set up and connections. To use WPS, the
connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA)
security. WPS can automatically set up a random
network name and WPA wireless security for
wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic
devices.
WPS allows you to push buttons instead of
entering a network name and wireless security
PIN.
1. Press ➔ and then tap
(Settings) ➔ Wireless and network ➔ Wi-Fi
settings.
2. Tap WPS button connection.
3. Press the WPS button on your Wi-Fi access
point within 2 minutes.
Manually Adding a Wi-Fi Network
1. Press ➔ and then tap
(Settings) ➔ Wireless and network ➔ Wi-Fi
settings.
2. Tap Wi-Fi to turn it on.
3. Tap Add Wi-Fi network.
4. Enter the SSID (Service Set Identifier) and
Security settings then tap Save.
Note: An SSID is a unique key which identifies a
wireless LAN. Its purpose is to stop other
wireless equipment from accessing your
LAN — whether accidentally or
intentionally. To communicate, wireless
devices must be configured with the same
SSID.
Bluetooth settings
In this menu you can activate Bluetooth, view or
assign a device name, activate your phone so
other Bluetooth devices can discover it, or scan
for other, available Bluetooth devices with which
to pair.
Activating Bluetooth
Ⅲ Press ➔ and then tap
(Settings) ➔ Wireless and network ➔
Bluetooth settings and tap Bluetooth to turn
it on.
Note: Bluetooth must be enabled prior to use.