Samsung SPH-L600ZKASPR - Manual (Page 88)

3. The network names and security settings (Open network or Secured with xxx) of
detected Wi-Fi networks are displayed.
 When you select an open network, you will be automatically connected to the
network.
 When you select a secured network, you will need to enter the wireless password to
connect to the network. Enter the password and touch Connect. You can use the
show password option to display the password as you enter it.
Manually Add a New Network Connection
1. Press and then touch > Settings > Connections tab.
2. Touch OFF/ON to turn Wi-Fi on, then touch Wi-Fi.
3. Touch Add Wi-Fi network.
4. Enter the Network SSID. This is the name of your Wi-Fi network.
5. Touch the Security field and select a security option. This must match the current
security setting on your target network.
6. Touch Connect to store the new information and connect to the Wi-Fi network.
Note: The next time your device connects to a previously accessed or secured wireless
network, you are not prompted to enter the wireless password again, unless you reset your
device back to its factory default settings.
Scan for a Wi-Fi Network
1. Press and then touch > Settings > Connections tab.
2. Touch OFF/ON to turn Wi-Fi on, then touch Wi-Fi.
3. Touch Scan.
Wi-Fi Settings
For information about configuring Wi-Fi settings, see Wi-Fi Settings .
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi network
or hotspot, and without having to set up the connection. For example, your phone can use Wi-Fi
Direct to share photos, contacts and other content with other Wi-Fi Direct devices.
1. Press and then touch > Settings > Connections tab.
2. Touch OFF/ON to turn Wi-Fi on, then touch Wi-Fi.
Web and Data 87