Samsung SC-D305-XAP - Manual (Page 23)

ENGLISH
Preparation
23 23
Connecting a Power Source
There are two types of power source that can be connected to your
camcorder.
-
The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to
the AC cord.
2. Connect the AC cord to a wall
socket.
Notes
■ You must use the AA-E8 type AC
Power adapter.
■ The plug and wall socket type may
differ according to your resident
country.
3. Connect the DC cable to the
DC jack socket of the camcorder.
4. Set the camcorder to the desired mode by holding down the tab
power switch and turning it to the CAMERA or PLAYER mode.
To select the CAMCORDER mode
✤ If you want to use this unit as a camcorder,
set the mode switch to TAPE position.
✤ If you want to use this unit as a DSC
(Digital Still Camera), set the mode switch to
MEMORY CARD position.
■
■
✤
✤
Power Switch