Samsung SC-D305-XAP - Manual (Page 73)

ENGLISH
73 73
Playback
✤ The ZERO MEMORY function works in both CAMERA and
PLAYER modes.
✤ You can mark a point on a tape that you want to return to following
playback.
1. Press the ZERO MEMORY button on the remote control before the
recording or during playback at the point you wish to return.
■ The time code is changed to a tape counter that is set to zero
memory with the
0:00:00(Zero memory indicator)
■ If you want to cancel the zero memory function, press the
ZERO MEMORY button again.
2. Finding the zero position.
■ When you are playing back, fast forward or rewinding the tape.
-
The tape stops automatically when it reaches the zero
position.
■ When you have finished recording, press the power switch on
the PLAY and press the
(REW) button.
- The tape stops automatically when it reaches the zero
position.
3. The tape counter with the (Zero memory indicator) disappears
from the display and the tape counter is changed to the time code.
Notes
■ In the following situations, ZERO MEMORY mode may be
canceled automatically:
-
At the end of the section marked with the ZERO MEMORY
function.
- When the tape is ejected.
- When you remove the battery pack or power supply.
■ The zero memory may not function correctly where there is a
break between recordings on the tape.
M
M
ZERO MEMORY (SCD305/D307 only)
✤
✤
■
■
■
■
■
■
M
M