Samsung SCH-R210LSAMTR - Manual (Page 38)

35
Number types that are already assigned a number show
the number instead of the number type label.
4. Use the Up/Down navigation keys to highlight the desired
unassigned number type, then press . The Contacts
entry information appears in the display with the new
number posted in the appropriate number type field.
5. Press again to save your changes to the existing
entry.
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers.
Example: To speed dial the Contacts entry assigned to Speed Dial 5, press
and hold , (1-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold , (2-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press , then press and hold , (3-touch dialing).
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
1. Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry” on page 30) until you enter
a name for the entry.
2. After entering the Contacts entry name, do not press .
Instead, use the Up/Down Up/Down navigation keys to
highlight the number field.
3. Press Options. The following options appear in the display:
• Set Speed Dial — Assign a speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
(For more information, refer to “Add Pauses to Contacts
Numbers” on page 31.)
Use the Up/Down navigation keys to highlight Set Speed
Dial, then press . The Speed Dial screen appears in the
display.