Samsung SCH-R210LSAMTR - Manual (Page 55)

Messaging 52
Tip: You can also create new Quick Text by viewing/editing an Outbox or
Drafts message and using the Save Quick Text option in the Options
menu. (For more information, refer to “Review Messages in the Outbox”
on page 47)
• Enter/change the text content of your Quick Text using the keypad.
(For more information, refer to “Entering Text” on page 25)
– To change Text Input Mode, press the Left soft key.
• Once you’re finished entering your Quick Text, press OK. The Quick
Text menu appears in the display with your new Quick Text
highlighted.
3. To change a Quick Text:
• Highlight a Quick Text you want to change, then press EDIT. (You
cannot change the pre-defined Quick Text included with your
phone.)
Note: You cannot change or erase pre-loaded Quick Texts.
• Enter/change the text content of your Quick Text using the keypad.
(For more information, refer to “Entering Text” on page 25)
4. To erase a Quick Text:
• Highlight a Quick Text you want to erase, then press Erase. You are
prompted to confirm erasure of the highlighted Quick Text.
• To erase the highlighted Quick Text, press Yes. To keep it, press No.
Text Message Settings
1. In standby mode, press the Down navigation key, then
select Msg Settings ➔ Text Message. The following options
appear in the display:
• Auto View — On/Off — With Auto View On, the full content of a
text message appears in the display as the messages is received.
• Signature — Create a signature, which can be included at the
bottom of outgoing message text.
• Auto Scroll — On/Off — With Auto Scroll On, the full content of a
text message automatically rolls upward on the display, one screen-
full at a time.
2. Highlight the desired option with the Navigation key.
3. Press the OK soft key to enter the highlighted option’s sub-
menu.