Samsung SGH-A157ZKAATT - Manual (Page 70)

66
• Call Status Tones: Activate an alert tone for one
of two available status categories. Press an
option to make your selection and then press
Options ➔ Save to store your new selection.
Options include:
– Call Connect Tone: Activate an alert tone that
sounds every time a call is connected.
–
Minute Minder: Activate an alert tone that
sounds every minute the call is active.
• Alerts on Call: Activates an alert tone for new
messages being received during an active call.
Press Save to store setting.
2. Press twice to return to the previous
Settings page.
Voice Call
1. Select Voice Call and choose from the
following options:
• Call Forwarding: Incoming calls are re-routed
to a secondary number that you specify. Select
the condition for the call forward action:
–
Forward Always activates an automatic forward
of all incoming calls regardless of condition.
– Busy activates an forward function only when
your number is currently in use and the caller
receives a busy signal.
–
No reply activates an automatic forward of all
incoming calls after a preset amount of time (5
seconds - 30 seconds).
–
Unreachable activates an automatic forward of
all incoming calls only when you can not be
reached and your phone status is set to
unreachable.
–
Cancel All cancels all call forwarding functions.
• Call Barring is a network service that allows
you to restrict your calls. This option is SIM
dependent and requires a subscription. For
more information, contact your service provider.
• Call Waiting: This network service informs you
when someone is trying to reach you during
another call. You can specify individual call
waiting options for voice calls and/or data calls.
–
Press Options and select one of the following
options: Activate, Deactivate, or Check status
(checks the status of this service on your
account).
• Auto Redial: The phone automatically redials
the last active number if the call was either cut
off or you were unable to connect.
–
Press either On or Off to activate/deactivate the
function.
– Press Save to store the new setting.