Samsung SM-C105AZWAATT - Manual (Page 215)

Applications 208
Customizing Your Remote
1. From the top of the main screen, touch (Remote
Control).
2. From the Universal Remote Control pop-up, touch
Continue.
3. From the Select your TV brand screen, touch your
TV’s manufacturer name.
• If you have a brand of TV not listed or you are using a projector,
select from one of the following two options. Choose from
either Show other brands or I have a home
projector.
4. Aim your device at the TV/projector and touch
(Power) to confirm the set up process completed
successfully by powering your TV/projector on.
Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the (Power) button
again
5. If the TV turned on, touch Yes, this code 1 works.
– or –
If the TV did not turn on after tapping (Power) and
waiting 10 seconds, touch No, test next code 2 or
Send this code 1 again.
6. From the Select your channel source screen, select
the entry that corresponds to your current channel
selection method:
• Set-top Box: selected when changing channels is done via a
receiver box. Channels are not changed via the TV remote but
rather through the receiver/box.
Tip: If you have a satellite system and a set-top box, see
“Satellite System Set-Top Box Setup” on page 209.
• My [BRAND] TV: selected when a signal is fed directly into
the TV and no box is used. Channels are changed directly on
the TV by using the TV remote and not a box’s remote.
Note: Try matching your current channel selection method.